PRESSING INSTRUCTIONS

** A HEAT GUN WILL TELL YOU IF YOUR PRESS IS ACCURATE **

Make sure your pressure is set correctly, do a pressure check –

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

DTF TRANSFERS

• 305 degrees;
• HEAVY PRESSURE 8-9 PSI.
• Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 15 seconds; WARM PEEL
• Press again for 8 seconds, with a parchment paper covering the design for protection (you don’ have to cool again before removing the covering on the repress)

 

SUBLIMATION

Please do your research and understand how the process of sublimation works. It requires a polyester material and light colored material. Depending on your shirt material you may need to adjust your heat, some fabrics scorch easier than others.

• 385-400 degrees;
• Pre press for 7 seconds;
• Press for 45-60 seconds.
• Cover with parchment paper, thread shirt or place parchment paper inside shirt to prevent dye migration.